· insulation: 5kΩ to 600MΩ at 100, 250 or 500V DC
· 1P earth: 0.15Ω to 10kΩ by the 62% measurement method (1 auxiliary rod only)
· selective earth measurement by means of a clamp (available as an option)
· RCDs: 10/30/100/300/500mA calibres or adjustable from 6 to 1,000mA in 1mA increments (non-tripping test, measurement of current and tripping time)
· continuity: 0.16Ω to 2kΩ (I > 200mA) with audible beep
· loop: 0.08 to 200Ω (resistance and impedance) - Does not trip RCDs ≥.30mA due to a patented system; calculation of short-circuit current (0.5A to 30kA)
· phase rotation: 20 to 440V AC / 15.3 to 450Hz
• rugged site-proof casing with strap for carrying or fixing at the waist
Open in new window link of a manufacture site.
Whether in a domestic, commercial or industrial environment (earth-earth, earth-neutral or live-earth), the C.A. 6115N electrical installation tester provides over 14 different measurements. With this tester, electricians and verification companies are able to test and certify compliance with standards and therefore the safety of electrical installations.
· insulation: 5kΩ to 600MΩ at 100, 250 or 500V DC
· 1P earth: 0.15Ω to 10kΩ by the 62% measurement method (1 auxiliary rod only)
· selective earth measurement by means of a clamp (available as an option)
· RCDs: 10/30/100/300/500mA calibres or adjustable from 6 to 1,000mA in 1mA increments (non-tripping test, measurement of current and tripping time)
· continuity: 0.16Ω to 2kΩ (I > 200mA) with audible beep
· loop: 0.08 to 200Ω (resistance and impedance) - Does not trip RCDs ≥.30mA due to a patented system; calculation of short-circuit current (0.5A to 30kA)
· phase rotation: 20 to 440V AC / 15.3 to 450Hz
• rugged site-proof casing with strap for carrying or fixing at the waist
• programmable thresholds and alarms in each function
• 800-measurement memory
• RS 232 interface for software and printer (option)
• remote control probe available as option
• power supply: rechargeable battery with built-in charger
• measurements for NF C 15-100, VDE 0100, etc.
• electrical safety: IEC 1010 300V Cat III
• dimensions: 295 x 230 x 108mm; weight: 2.2kg
No customer comments for the moment.
9 other products in the same category:
Categories
-
Instruments [394]
-
Power and Electro [329]
- 1 kV insulation testers [13]
- Calibrators [6]
- Insulation Test Equipment (5 and 10 kV) [16]
- Ground Resistance Test Equipment [26]
- Multifunction Installation Testers [11]
- Loop and RCD Test Equipment [6]
- Multimeters / Clampmeters [59]
- Industrial ScopeMeters [29]
- Portable Appliance Testing (PATs) and safety [5]
- Oil Test Equipment [12]
- Low Resistance Ohmmeter Test Equipment [26]
- Power Factor (C and DF) Test Equipment [7]
- Battery Test Equipment [4]
- Transformer Test Equipment [23]
- Circuit Breaker Test Equipment [15]
- Relay Test Equipment [8]
- Power Quality Equipment [26]
- Tachometers [3]
- TDRs (Time Domain Reflectometers) [4]
- HiPot (High Potential) AC / DC Test Equipment/ Vacuum Interrupter Testers [6]
- Light meters [1]
- VLF sets [19]
- measuring LF electric and magnetic fields [3]
- Локаторы [1]
- Loggers and Recording [8]
- Electronic's instruments [19]
- Cable Fault Locating Equipment [15]
- Termal imager [9]
- Environment line [14]
-
Power and Electro [329]
- Elecrto test laboratories [4]
Search
