PEL103 Power and Energy logger (WITH DISPLAY)

Features:

Simple to use, single, dual-split and three phase (Y, Δ) power & energy loggers
Offers all the necessary functions for Power/Energy data logging for most of the 50Hz, 60Hz, and 400Hz and DC distribution systems worldwide offering numerous distribution set-ups
Direct current measurements from 50mA up to 10,000A with MA193 external current sensors
Power measurements: VA, W and var
Energy measurements VAh, Wh (source/load indication) and varh (including quadrant indication)
Power Factor (PF), Cos (Φ), and Tan (Φ)
Crest Factor
Total Harmonic Distortion (THD) for voltages and currents
Harmonics from the fundamental signal up to the 50th order for 50/60Hz voltages and currents
Frequency measurements
RMS and DC measurements @ 128 samples/cycle – each phase simultaneously
Bright blue triple LCD on the Model PEL 103 (3 phases shown simultaneously)
Storage of measured and calculated values on a SD-Card or SDHC-Card
Automatic recognition of the connected current sensors/probes
Configuration of current and voltage ratios to external PT and CT ratios
17 types of supported hook-ups or electrical distribution systems
USB, LAN, and Bluetooth communication
DataView® software for data recovery, real-time communication with a PC and report generation with pre-written templates

Three-Phase 3-Wire Power Networks

Three-phase 4-Wire Y Power Networks

DC Power Networks

The New PEL100 Series from Chauvin Arnoux
Models	PEL102	PEL103
Technical specifications
Display	Without	Triple digital display
Installation types	Single-phase, split-phase, three-phase with or without neutral and many other specific configurations configurations
Accuracy class	0.2%
Electrical Specifications
Number of channels	3 voltage inputs / 3 current inputs (calculation of neutral current)
Network frequency	50 Hz, 60 Hz & 400 Hz
Voltage range	0 to 1,000 V AC and DC
Current sensors supported MN93 MN93A C193 A193 & MA193 PAC93 E3N	2 to 240 A_AC 0.005 A_AC to 5 A_AC / 0.1 A to 120 A_AC 3 A to 1,200 A_AC 100 mA to 10,000 A_AC 10 A to 1,000 A_AC / 10 A to 1,400 A_DC 50 mA to 10 A_AC/DC / 100 mA to 100 A_AC/DC
Voltage ratio / Current ratio	Up to 650,000 V / up to 25,000 A
Calculated measurements
Power	10 W to 10 GW / 10 var to 10 Gvar / 10 VA to 10 GVA
Energy	up to 4 EWh / 4 Evarh / 4 EVAh
Phase	Cos φ, tan Φ, PF
Harmonics	up to the 50th order
Complementary functions
Phase order	Yes
Min / Max	Yes
Mounting	Magnet, hook
Recording
Sampling / Acquisition rate / Aggregation	128 s/period - 1 measurement per second - from 1 min to 60 min
Memory	SD card (SD-HC up to 32 GB)
Communication	Bluetooth (Class 2), Ethernet, USB
Power supply	110 V - 250 V (+ 10%, - 15 %) at 50-60 Hz & 400Hz
Safety	IEC 61010 600 V CAT IV – 1,000 V CAT III
Mechanical Specifications
Dimensions	256 x 125 x 37 mm without sensor
Weight	900 g	950 g
Casing	IP54 , UL (pending)